发布日期： 2021-03-15 作者： 点击：[1056]
序号 | 第一作者 | 论文题目 | 发表/出版时间 | 发表刊物 | 收录类别 |
1 | 李瑶 | Failure analysis of bolts on fatigue test bench for excavator stick | 2020-12-01 | Engineering Failure Analysis | SCI |
2 | 李嘉波 | A Novel State Estimation Approach Based on Adaptive Unscented Kalman Filter for Electric Vehicles | 2020-10-21 | IEEE Access | SCI |
3 | 魏孟 | State of Charge Estimation of Lithium-Ion Batteries Using LSTM and NARX Neural Networks | 2020-10-18 | IEEE Access | SCI |
4 | 杨双阁 | Notch radius effect on fracture toughness of ceramics pertinent to grain size | 2020-09-30 | Journal of the European Ceramic Society | SCI |
5 | 杨人凤 | Study on the Applicability of Needle/Cone Penetration Experiment for Asphalt-Rubber | 2020-09-24 | Advances in Civil Engineering | SCI |
6 | 陈一馨 | Research on the Prediction Method of Ultimate Bearing Capacity of PBL Based on IAGA-BPNN Algorithm | 2020-09-23 | IEEE Access | SCI |
7 | 陈正仓 | Research on Coupling Dynamics and Coordinated Control of a Legged Robot | 2020-09-01 | JOURNAL OF VIBRATION AND CONTROL | SCI |
8 | 陈世斌 | Modulating electromagnetic properties in three‐dimensional diamond-structured photonic crystals with double planar defects | 2020-08-20 | Microwave and Optical Technology Letters | SCI |
9 | 左浩 | A new C-0 layerwise wavelet finite element formulation for the static and free vibration analysis of composite plates | 2020-08-18 | Composite Structures | SCI |
10 | 杨双阁 | Probabilistic relation between stress intensity and fracture toughness in ceramics | 2020-08-15 | Ceramics International | SCI |
11 | 陈世斌 | Enhanced Transmission Performance of a Dipole Antenna Based on a Ceramic Diamond-Structure PBG Substrate with a Defect Cavity | 2020-07-27 | Journal of Electronic Materials | SCI |
12 | 徐信芯 | Properties of Drillstring Vibration Absorber for Rotary Drilling Rig | 2020-07-15 | Arabian Journal for Science and Engineering | SCI |
13 | 张小丽 | An inverse decaying frequency modulation EMD method for closely spaced modal parameter identification in high precision with Laplace wavelet correlation filtering | 2020-07-09 | Measurement Science and Technology | SCI |
14 | 朱秋妍 | Fatigue life evaluation of web butt welding structure on boom of excavator by hot spot stress approach | 2020-07-04 | Engineering Failure Analysis | SCI |
15 | 贾峰 | Deep Neural Network Ensemble for the Intelligent Fault Diagnosis of Machines Under Imbalanced Data | 2020-07-03 | IEEE Access | SCI |
16 | 赵睿英 | Robust trajectory tracking control for uncertain mechanical systems: servo constraint-following and adaptation mechanism | 2020-07-02 | International Journal of Control | SCI |
17 | 赵睿英 | Robust Control for Nonlinear Delta Parallel Robot With Uncertainty: An Online Estimation Approach | 2020-07-01 | IEEE Access | SCI |
18 | 李嘉 | Effects of a Combination Impeller on the Flow Field and External Performance of an Aero-Fuel Centrifugal Pump | 2020-07-01 | Energies | SCI |
19 | 张晗 | Collaborative sparse classification for aero-engine’s gear hub crack diagnosis | 2020-07-01 | Mechanical Systems and Signal Processing | SCI |
20 | 孙浩 | Controlling tractor-semitrailer vehicles in automated highway systems: Adaptive robust and Lyapunov minimax approach | 2020-07-01 | Asian Journal of Control | SCI |
21 | 王斌华 | Mode I interlaminar fracture toughness of CFRP laminates reinforced with short aramid fibers | 2020-07-01 | Journal of Adhesion Science and Technology | SCI |
22 | 靳淇超 | Investigating the contact responses of the roller cavity surfaces in the compressor blade rolling process | 2020-06-30 | Advances in Materials Science and Engineering | SCI |
23 | 沈建军 | A Deep Multi-Label Learning Framework for the Intelligent Fault Diagnosis of Machines | 2020-06-16 | IEEE Access | SCI |
24 | 窦建明 | Unsupervised online prediction of tool wear values using force mdel coefficients in milling | 2020-06-12 | The International Journal of Advanced Manufacturing Technology | SCI |
25 | 张力平 | Back recursive estimation of unkown frequency sinusoidal distrubance in superconducting RF cavities | 2020-06-03 | ISA TRANSACTIONS | SCI |
26 | 张军 | Automatic detection of moisture damages in asphalt pavements from GPR data with deep CNN and IRS method | 2020-05-30 | Automation in Construction | SCI |
27 | 张军 | In-situ recognition of moisture damage in bridge deck asphalt pavement with time-frequency features of GPR signal | 2020-05-30 | Construction and Building Materials | SCI |
28 | 刘晓辉 | Effect of contact characteristics on the self-rotation performance of conical picks based on impact dynamics modelling | 2020-05-20 | ROYAL SOCIETY OPEN SCIENCE | SCI |
29 | 杨宜坤 | Image retrieval via learning content-based deep quality model towards big data | 2020-05-19 | Future Generation Computer Systems | SCI |
30 | 郭万金 | A Robotic Grinding Motion Planning Methodology for a Novel Automatic Seam Bead Grinding Robot Manipulator | 2020-05-05 | IEEE Access | SCI |
31 | 武琳琳 | Optimal Design of Adaptive Robust Control for the Delta Robot with Uncertainty: Fuzzy Set-Based Approach | 2020-05-01 | Applied Science | SCI |
32 | 王斌华 | Effects of resin pre-coating on interfacial bond strength and toughness of laminar CFRP with and without short aramid fibre toughening | 2020-05-01 | Journal of Composite Materials | SCI |
33 | 王斌华 | Mode-II fracture properties of CFRP/steel composite structure reinforced by short aramid fibers | 2020-05-01 | Journal of Adhesion Science and Technology | SCI |
34 | 王海英 | A Three-Point Hyperbolic Combination Model for the Settlement Prediction of Subgrade Filled with Construction and Demolition Waste | 2020-04-22 | materials | SCI |
35 | 曹学鹏 | Design and Modeling of Oceanographic Environment Adaptive Variable Pumps | 2020-04-14 | IEEE Access | SCI |
36 | 孟凡为 | Practical Control of a Cold Milling Machine using an Adaptive PID Controller | 2020-04-06 | Applied Sciences | SCI |
37 | 赵睿英 | Udwadia–Kalaba constraint-based tracking control for artificial swarm mechanical systems: dynamic approach | 2020-04-01 | Nonlinear Dynamics | SCI |
38 | 张晗 | Aero-engine bearing fault detection: A clustering low-rank approach | 2020-04-01 | Mechanical Systems and Signal Processing | SCI |
39 | 陈世斌 | Modulating electromagnetic properties in three-dimensional diamond-structured photonic crystals with double planar defects | 2020-04-01 | MICROWAVE AND OPTICAL TECHNOLOGY LETTERS | SCI |
40 | 封硕 | A hybrid finite element and analytical model for determining the mesh stiffness of internal gear pairs | 2020-03-28 | Journal of Mechanical Science and Technology | SCI |
41 | 张泽宇 | Cycle Condition Identification of Loader Based on Optimized KNN Algorithm | 2020-03-24 | IEEE Access | SCI |
42 | 王斌华 | Modelling and testing of large-scale masonry elements under threepoint bending – Tough and strong nacre-like structure enlarged by a factor of 20,000 | 2020-03-15 | Engineering Fracture Mechanics | SCI |
43 | 高永昌 | Effect of inclination and anteversion angles on kinematics and contact mechanics of dual mobility hip implants | 2020-03-14 | Journal of Healthcare Engineering | SCI |
44 | 宋绪丁 | Extrapolation Algorithm of Ship Track Smoothing Based on Spline Theory | 2020-03-13 | Journal of Coastal Research | SCI |
45 | 王海英 | A quadratic weighted centroid algorithm for tunnel personnel positioning | 2020-03-11 | International Journal of Distributed Sensor Networks | SCI |
46 | 李大涛 | A novel evaluation of fracture toughness for random fibrous material | 2020-03-10 | Composite Structures | SCI |
47 | 颜黎明 | Design and Implementation of Luenberger Model-Based Predictive Torque Control of Induction Machine for Robustness Improvement | 2020-03-03 | IEEE TRANSACTIONS ON POWER ELECTRONICS | SCI |
48 | 吕景祥 | A novel method to forecast energy consumption of selective laser melting processes | 2020-02-27 | International Journal of Production Research | SCI |
49 | 吕景祥 | Calculation method and its application for energy consumption of ball mills in ceramic industry based on power feature deployment | 2020-02-26 | Advances in Applied Ceramics | SCI |
50 | 贾洁 | Impact of vibration compaction on the paving density and transverse uniformity of hot paving layer | 2020-02-23 | International Journal of Pavement Engineering | SCI |
51 | 李嘉 | Effects of a Combination Impeller on the Flow Field and External Performance of an Aero-Fuel Centrifugal Pump | 2020-02-15 | energies | SCI |
52 | 张富强 | Uncertain demand modeling of warehouse product service system based on interval number optimization | 2020-02-01 | International Journal of Computer Integrated Manufacturing | SCI |
53 | 丁凯 | Hidden Markov model-based autonomous manufacturing task orchestration in smart shop floors | 2020-02-01 | Robotics and Computer-Integrated Manufacturing | SCI |
54 | 李大涛 | Porosity Effects on Mechanical Properties of 3D Random Fibrous Materials at Elevated Temperatures | 2020-02-01 | Acta Mechanica Solida Sinica | SCI |
55 | 张晗 | A Bi-level Nested Sparse Optimization for Adaptive Mechanical Fault Feature Detection | 2020-01-31 | IEEE Access | SCI |
56 | 李大涛 | Temperature Dependence of the Fracture Toughness JC of Random Fibrous Material | 2020-01-30 | applied science | SCI |
57 | 曹伟 | Microstress cycle and contact fatigue of spiral bevel gears by rolling-sliding of asperity contact | 2020-01-25 | Friction | SCI |
58 | 李大涛 | Fatigue Property and Improvement of a Rounded Welding Region between the Diaphragm Plate and Closed Rib of an Orthotropic Steel Bridge Deck | 2020-01-20 | metals | SCI |
59 | 宋绪丁 | Fatigue behavior and damage mechanism of aluminum foam sandwich with carbonfiber face-sheets | 2020-01-09 | Journal of Mechanical Science and Technology | SCI |
